An assessment before an upgrade
Adding an EV charger, heat pump or new appliances? We check capacity first. Empty breaker spaces alone do not tell you how much demand your service can support.
Panel & service upgrades
A 100A to 200A service upgrade in London typically costs $2,400 to $3,500 + HST, includes the ESA permit and inspection, and takes about one working day. Levere Electric does a load calculation first, so you only upgrade if your home actually needs it.
ECRA/ESA #7017944 · Owner-operated · Serving London & area

A panel replacement changes the equipment that distributes power to the circuits in your home. A service upgrade increases the capacity supplied to the home and can involve the meter base, service conductors and the utility. They often happen together, but they answer different questions. We look at your existing equipment and electrical demand, then explain whether you need a replacement, a larger service or neither.
Not every EV charger needs a bigger service. Many 100A homes can run a 40A charger safely once the numbers are checked. If the load calculation says you are fine, we will tell you.
Adding an EV charger, heat pump or new appliances? We check capacity first. Empty breaker spaces alone do not tell you how much demand your service can support.
The agreed scope covers utility coordination, the new panel and breakers, grounding and bonding, and the ESA permit and inspection, so nothing is left for you to arrange.
Tell us what you may add later so we can size the panel and service capacity for the home you will have, not just the home you have today.
Use the request form or call 226-559-7897 with a picture of your panel and what you are planning to add.
We run the load calculation and send a written quote with the options, including whether an upgrade can be avoided.
We coordinate the utility disconnect, replace the panel and service equipment, and bring grounding and bonding up to code.
ESA inspects the work. You get a labelled panel and the permit paperwork for your records.
Straight answers to what London homeowners ask us most.
No. A panel replacement changes the equipment that distributes power to your circuits. A service upgrade increases the capacity supplied to the home and may involve the meter base, service conductors and the utility. We explain which work your home needs before quoting, and the two are often done together.
Not always. We do a load calculation first. Many homes can support a 40A charger even with a 100A service, so an upgrade is only recommended when the numbers say you need one. An approved EV energy management system can also be an alternative to a larger service.
Most 100A to 200A upgrades run $2,400 to $3,500 + HST, including the new panel, breakers, grounding and bonding, utility coordination, and the ESA permit and inspection. We confirm the price after seeing a photo of your panel and meter.
Plan for about one working day on site. The power is off for part of that time while the utility disconnects and reconnects the service. We confirm the expected timing with you before the installation so you can plan around it.
Yes. Every panel and service upgrade includes the ESA permit and inspection. Levere Electric also coordinates the disconnect and reconnect with the utility, so you do not have to arrange anything yourself.
Send a photo of the closed panel, its label, and the meter location, plus a short note about what you are adding, such as an EV charger, heat pump or hot tub. Only photograph accessible, closed equipment. There is no need to remove any covers.
Send a photo of your panel and tell us what you are adding. We run the numbers and give you a written quote, including the option of not upgrading at all.
ESA licensed (ECRA/ESA #7017944) and fully insured. Serving London, St. Thomas, Dorchester, Komoka and Delaware and the surrounding area.